fishzipper41

Door Handle Replacement Door handles may seem like an insignificant thing, but if you dislike the style or design of them, or are unable to use them then it's time to replace them. With some patience, you can put in an entirely new handle in a short time. Modern door handles are typically equipped with cover plates that conceal the screws for an attractive appearance. If your new handle does not have screws already connected, you'll need to attach them separately. Remove the old handle The door handle isn't only a decorative addition to your home It's also an element of security that allows you to lock and unlock the door. However, as time passes, your door handle may lose its grip, feel loose or start to look old and worn. This is a good indication that it's time to replace your door handle. If your door handle is becoming difficult to use, it might be time to replace it. This is a problem because it means that you can not lock or unlock your door which could be an security risk to you and your family. Another reason to replace the door handle is if it's damaged or broken. A broken door handle is dangerous, especially for elderly or children members who might struggle to open it. They may get trapped. Fortunately, it's fairly easy to fix a broken door handle by replacing the handle that was broken. The majority of modern door handles are a standard size, so they will fit on any door. If you are not sure if the new door handle you are buying will work, remove the old one and measure its housing holes. This will allow you to purchase the right size door handle. The easiest way to take off your old door handle is to unscrew it from the door. Usually, a screwdriver is used. Some door handles have an enclosure plate that hides the screws used to mount them. You'll need to remove this to get to the screws. Once you have removed the old handle, take an outline of how the spindle is positioned to ensure you are able to align it when you fit the new one. You can also remove the door handle by unscrewing the latch mechanism. This is typically done with the screwdriver, but you'll need to find the small latch, which should be on the edge of the trim piece. After you have removed the latch, you'll need to remove the handle from the strike plate, and then remove the latch away from the door's edge. The Strike Plate If you are replacing the handle, you'll need to replace the latch plate, which is the hole which the door's latch hooks into when it closes. The new handles will come with two latch plates: a rectangular and circular plate (see the image above which illustrates the components of the door handle). If you have a rectangular latch plate, you can replace it with a round one. This will allow the latch to be able to hook into the strike plate, making the handle more convenient. The first step is to loosen the screw that holds the latch plate in place. These screws can be quite tight and will require some force to loosen. If you can, it might be helpful to have another person assist with this part. After the screws have been removed, the latch plate will slide out of the door easily. If it is stuck or doesn't move then use a small nail file to scratch around the edges of the latch plate. This may help free the plate. Now you can prepare the new strike plate to be installed. Install the latch plate in the doorjamb using the wood screws that came with your new handles. Be careful not to over-tighten the screws, as this could cause damage to the strike plate. If you're not sure if the latch plate is in the proper position, try closing and opening the door to see whether it latches and closes correctly. If not then you'll need to adjust the strikeplate either up or down, or forward or back until the door shuts correctly. If the door is still moving or jiggles, you may have to expand your latch hole on the strike plate. This is more frequent with older doors, but could be due to wear and tear hinge mortises that are too narrow or not the right size for the latch, or due to a broken or damaged strike plate. If this is the case, follow the exact procedure as adjusting the strike plate, using a metal file instead of the hammer and chisel. Eliminating the Latch The latch is an angled metal piece that slides into and out of a hole on the inside of your door. The latch moves forward when you turn the handle. It also hooks into the door frame so that the door remains closed. If your door wobbles when you close, an upgrade to the latch could be all you need to fix the issue. The screws that hold the door latch are difficult to see however, you can put a screwdriver in a small hole in the trim plate and pry the latch off. After you've removed your trim plate, it should be simple to remove the latch and the remaining bolts that hold the spindle and latch in place. If the latch won't come out you can try using an old-fashioned paper clip or tool to free it from the handle mechanism. Insert the item into the latch's slot that is recessed and gently twist or jiggle it until you feel the handle and latch start to separate. You may need to repeat this several times before the latch is loose enough to let it out. You should be able to slide the new latch into its slot without issues after you've removed the old one. Use the new screws to attach the latch to the strike plate or door frame. Make sure it is correctly positioned in the slot and aligned with the screw chambers. Measure the existing backset (the distance between the centre of the large hole in the front of the door and the edge) before installing the new handle. Also, make sure whether the size of the latch on the new handle is in line with this measurement. If you are replacing the handle or latch or handle, or if the old lock cylinder has been damaged, then you will need a new one. If you're not replacing the locks, however, a new latch will fit in the existing recess and work with your current keys. Make sure you select an entry point with rectangular cover plates that match your old handles. Removal of the Cover Plate You can replace your door handles with a modern design of roses and levers to make a difference in the appearance of your home. You can buy complete sets with matching privacy adaptors, escutcheons, and escutcheons. To replace the door handle inside remove the cover plate (or rose), which protects the screws and the inner mechanism. Find window handles repairmywindowsanddoors.co.uk opening tab on the plate and use a flathead screwdriver to remove it from the knob. It may have an opening on one edge or be held by pins. After the cover plate is off take off the screw that holds the interior handle in place and set it aside. Take off the screws that hold both the outer and inner plates. You can loosen them with a Philips Screwdriver. Then, take the inner plates and latch plate from the door and put them aside. Most doors have gaps between the jamb of the door and the edge of the frame that makes room for a handle, however not all do. If yours doesn't, you'll need to make a hole in the door for the new handle. This is the same procedure as opening a door locked however, you'll need to be extra careful not to scratch the door or frame. The installation of new door knob screws is required after the holes have been drilled. Make sure you purchase the same size as the old ones, to ensure that you do not end up with an handle that is either too tight or loose. You'll also have to install the new latch plate and strike rod that aren't included in most door handle sets. Amazon's Choice FAERSI 2-piece chrome finish handle sets are an excellent choice if you're in the market of a top-quality interior door handle replacement set. It is a factory-fit and has received hundreds five-star reviews. It's an excellent option to replace worn or damaged door hardware on your Chevy.